bimini top

Mar 28, 2018
2
MACGREGOR 26S FORT LAUDERDALE
Hello, I recently bought a 1993 Macgregor 26s. I want to buy and install a bimini top for it. Any suggestions as to what size H, W, L that I would need? Also, any recommendations as to where I can buy one?

Thanks,
Sandy Seas
 

Sumner

.
Jan 31, 2009
5,254
Macgregor & Endeavour 26S and 37 Utah's Canyon Country


I have info on my site as to the size that we used and also how it was mounted on a 26S. Unfortunately the company that we bought it from doesn't seem to be in business anymore but the rest might help you....

http://purplesagetradingpost.com/sumner/macgregor/outside-10.html

Sumner
===========================================================================
1300 miles to The Bahamas and Back in the Mac...
Endeavour 37 Mods...

MacGregor 26-S Mods...http://purplesagetradingpost.com/sumner/endeavour-main/endeavour-index.html
Mac Trips to Utah, Idaho, Wyoming, Canada, Florida, Bahamas
 
Jul 7, 2004
8,402
Hunter 30T Cheney, KS
Be sure to get the height right. I couldn't cut mine down enough on my '92 Mac26S, so I had to add a cringle in the mainsail over the boom to raise it for clearance.
 

AndyVS

.
Sep 4, 2015
56
Corsair 31 UC 179 Port Sanilac
I purchased mine from Softopper three years ago and they make one to fit a 26s. With my old baggy main the boom would drag a bit but after I replaced the sail the boom now clears and backstay clears by a inch or two. Getting the position correct is a bit of a project and easier with two people. I used duct tape to hold the hinges to the boat so I could reposition and test everything before drilling holes.