Atlantic towers arch 450

[rtmccue]

Iim looking at a At
Atlantic Towers arch for my 2000. 450 has anyone installed one on a 456 or 450 460 I would like to see attachment points
http://www.atlantictowers.com/products_sail_arch.php

 

[dehler25]

I was unable to see if you have the stainless or fiberglass forward arch. Are you wanting to make it an aft arch?

 

[rtmccue]

Yes I have a stainless arch I want to pull the dink up higher and put solar panels on

 

[Jim_H42]

If you write to Atlantic Tower and ask them to send you pictures of 456 or 450 460 I suspect you'll get some showing the attachment points. (I did this for my Passage 42 - the pictures gave me a good idea of what to expect).

 

[rtmccue]

Yes I have been on the web page ,I’m trying to get a picture of what they did inside to gain access to the mounts if that makes sense?

 

[Jim_H42]

I don't know the differences between a 450 and a P42. But I recently installed an Atlantic Arch on my P42. Although Atlantic Towers provides backing plates, I created larger ones out of 1/2" fiberglass sheet (from McMaster Carr). I was able to access the mounting points from the aft storage compartments. It was quite a bit of work to figure out the tube lengths and mounting angles but I'm happy with the end result.