I have a flexible water tank up in the bow, under the v-berth, and I'm getting ready to add a rigid tank under the port settee.
What are some best practices for plumbing the new tank. I will be using Uniseals for the fittings.
Should I tee off the fill hose before the flex tank inlet, or go from the flex tank outlet to the new tank inlet?
The boat is a 81 Hunter 27
The fresh water fill is in the chain locker, 1-1/2" hose to flexible inlet
What are some best practices for plumbing the new tank. I will be using Uniseals for the fittings.
Should I tee off the fill hose before the flex tank inlet, or go from the flex tank outlet to the new tank inlet?
The boat is a 81 Hunter 27
The fresh water fill is in the chain locker, 1-1/2" hose to flexible inlet