B&G wind indicator connected to Zeus 2 mfd
NMEA 2000 buss, continuous cable thru mast to buss
Connection to buss checked. Result= solid
Indicator has worked fine for 2 seasons. Was working during last evenings sail, then suddenly no input. Checked device list on Zeus and wind indicator not there any longer. Shut down and rebooted system, still no instrument. Anyone xperienced same?
Next step is going up the mast to check connection there. If that's ok, is there a way to check for signal on the line with a DVOM?
I should add that I do know how to use a vom to measure voltage, just don't know which pins on a NMEA 2000 connector to measure across or what kind of values I should be looking for.
NMEA 2000 buss, continuous cable thru mast to buss
Connection to buss checked. Result= solid
Indicator has worked fine for 2 seasons. Was working during last evenings sail, then suddenly no input. Checked device list on Zeus and wind indicator not there any longer. Shut down and rebooted system, still no instrument. Anyone xperienced same?
Next step is going up the mast to check connection there. If that's ok, is there a way to check for signal on the line with a DVOM?
I should add that I do know how to use a vom to measure voltage, just don't know which pins on a NMEA 2000 connector to measure across or what kind of values I should be looking for.
Last edited: